The installation steps of sleeve anchor usually include the following key steps. Please note that the specific steps may vary depending on the product model, substrate type, and installation environment, but the following steps provide a basic installation process reference:

1、 Preparation Phase for Installing Sleeve Anchor  

Choose the appropriate sleeve anchor: Select the appropriate specifications and materials based on actual needs to ensure compatibility with substrates such as concrete, stone, brick walls, etc.

Preparation tools: Prepare necessary installation tools such as electric drills, drill bits, wrenches, nuts, etc.

Determine installation location: Mark the installation location on the substrate to ensure accurate positioning.

2、 Drilling Phase of Sleeve Anchor Installation  

Choose the appropriate drill bit: Select the appropriate drill bit diameter based on the specifications of the Sleeve Anchor.

Drilling: Use an electric drill to drill holes of appropriate depth on the substrate. The depth of the hole should be slightly greater than the length of the sleeve of the sleeve anchor to ensure that the sleeve can be fully inserted into the hole.

Cleaning up debris in the hole: After drilling, use compressed air or brushes to clean the dust and debris in the hole, ensuring that the hole is clean and free of debris.

3、 Installation Phase of Sleeve Anchor 

Insert sleeve anchor: Insert the sleeve portion of the sleeve anchor  into the hole to ensure a tight fit between the sleeve and the hole wall.

Installation of bolts: Thread the bolts through the reserved holes of the object to be fixed (such as steel structural components, mechanical equipment, etc.), and then insert them into the sleeve.

Install nut: Install the nut on the outer end of the bolt and gradually tighten it using tools such as a wrench. As the nut is tightened, the head or special part of the bolt will push the sleeve to expand inside the hole, thereby firmly fixing it in the substrate.

4、 Inspection and Adjustment of Sleeve Anchor  

Check the tightness: Use tools such as wrenches to check the tightness of the nuts, ensuring that the specified tightening torque is reached.

Check installation quality: Check if the sleeve anchor is securely installed without any looseness or tilting. At the same time, check for any abnormal conditions such as damage or cracks in the substrate and fixed objects.

matters needing attention

Choose a suitable installation location: Avoid installing sleeve anchors in weak or easily damaged areas of the substrate.

Control drilling depth: The drilling depth should be moderate to avoid installation instability or damage to the substrate caused by being too deep or too shallow.

Pay attention to safety: During the installation process, protective goggles, gloves, and other safety equipment should be worn to avoid injury.

As a company specialized in a fasteners production base, our business scope is very broad . We have anchor bolt , bolt , clamp ,nut , screw , sleeve anchor , tija cu filet and flat washer .About the sleeve anchor , we have different type of it .Such as hex bolt sleeve anchor , plastic bolt sleeve and metal sleeve anchors .We also have different size of it .Such as 3 8 x 5 sleeve anchor , 1 2 x 4 sleeve anchor ,and 3 8 x 1 7 8 sleeve anchor .The sleeve anchor price in our company are reasonable . If you are interesting in our product welcome to contact us!